"IMPERIAL SUPPLIES" FLARE UNION TEE
45° Flare Tube Union Tee Fitting.
45° Flare Tube Fittings conform to ASA, ASME, SAE, and Mil. specifications
Good resistance to vibration. Use Long Nut in applications with severe vibration.
45° Flare Tube Fittings flare fittings are reusable.
Used with copper, brass, aluminum, and steel hydraulic tubing that can be flared.
Working pressure up to 2,000 psi, depending upon tubing being used. (Will withstand burst pressure up to 5,000 psi).
Temperature Range: -65° F. to 250° F. at maximum operating pressures.
Tube Outside Diameter: 1/2
Thread Size: 3/4-16
Cross Reference: 44 x 8
